Product Description
Product Number | 41 781 979-00 |
EAN Number | 4099477274775 |
Flow rate Max. | 14 l/min |
Brand | Dornbracht |
Product Detail
- Exposed trim parts
- Rain panel with 5 different flow modes
- Rain panel, 600 x 420 mm
- PURIFY RAIN, 175 x 175 mm, max. flow rate 10 l/min (at 3 bar)
- FULL RAIN, 455 x 315 mm, max. flow rate 14 l/min (at 3 bar)
- LAMINAR FLOW, max. flow rate 10 l/min (at 3 bar)
- AQUAPRESSURE FLOW, max. flow rate 9.4 l/min (at 3 bar)
- COOL MIST, max. flow rate 1 l/min (at 3 bar)
- With anti-scale system
- Technical data:
- Min. recess depth 150 mm
- Weight 15kg
- Electric:
- Recommended control element: xTool
- Ceiling module power supply
- 24V DC (CV)
- Ambient lighting
- LED coloured light RGBW
- Bulbs protected against splashing water
- Activation
- ZigBee Light Link RGBW controller
- Provided by customer: Zigbee gateway
- Environment
- Technical data:
- Not suitable for outdoor use.
- Not suitable for use in a steam room.
- Not suitable for use in chlorinated or salty environments.
- Comply with the protection zone regulations as defined in DIN VDE 0100, Part 701 (IEC 60364-7-701).
- Sanitary:
- Recommended water hardness: 6-7 °dH - if the water is harder, integrate a water softener that uses the ion exchange principle into the feed pipe.
- For choosing the drainage, taking into consideration the discharge of all the products in the shower, the specific demand needs to be assessed. Recommendation: Floor drain (connected rating) = 1l/sec, drainage rate DN 50
- Feed pipe (hot/cold): 2x DN 20
- For the optimum choice of hot water storage device - taking into consideration additional drawing-off points and the frequency with which the rain panels are used - the specific demand needs to be assessed
- Notes:
- Dornbracht recommends consulting a systems integrator.
- Includes light bulbs with a Class G energy efficiency
Customisation Options
Dornbracht provides fittings and accessories that are perfectly tailored to individual requirements. The design can be personalised in many ways, from technical adjustments, to exclusive surface finish variants. Adaptations to dimensions such as the length and projection of the fittings, and modifications to functions such as the flow rate or the product marking, are all part of the service. Both the dimensions and functions of these products can be readily adapted.
Downloads
Here you have the opportunity to download all relevant documents. Whether brochures, instructions or important information - everything is available for download. Further technical files can be found in the technical information section further down on the product page.
Accessories needed
Technical information
2D CAD
3D CAD
BIM
Certificates
Installation
Parts & Support