Activate
Hot, cold, click!
Digital controls, countless uses.
Operate
Adjust individually.
Simple and intuitive operation – with just a flick of the wrist.
Experience
Experience water.
Comfortable applications for the bathroom, spa and kitchen.

All electronic control features at a glance.

Safety information

Logic controls

Display button

1 = Head spray On/Off

 

2 = Rain curtain On/Off

 

3 = Hand shower On/Off

 

4 = Body spray On/Off

 

 

 

 

 

5 = reAdjust On/Off

 

6 = reJoice On/Off

 

7 = Cold-water mist On/Off

 

8 = reLease On/Off

 

 

 

 

9 = Fragrance reAdjust On / Off

 

10 = Fragrance reJoice On/Off

 

11 = Shower zone lighting On / Off

 

12 = Fragrance reLease On/Off

Display button 1
Display button 2
Display button 3

Rotary knob

Functions

Sleep mode
The Sensory SkyATT has an automatic sleep mode. The system can be woken up and made ready for use by pressing or turning any control element. If it is not used for 60 minutes, the System will return to automatic sleep mode. The pre-defined water volume is 80%, the pre-defined temperature 38°C. Individual settings are saved for five minutes after the water has been switched off.
Ready - Display button 1
Ready - Display button 2
Ready - Display button 3

On/Off

using rotary knob
using rotary knob
using display button
Cold-water mist
The temperature and volume cannot be adjusted.
Light
The light colour and intensity cannot be adjusted.
Fragrance
The fragrance is automatically supplied in the water in the rain curtain. It is not possible to activate more than one fragrance at any one time

Volume adjustment

Temperature adjustment

Disable scalding protection system

1 = turn to max

 

2= push + turn at the same time

 

The scald protection system will be re-enabled after 10 minutes.

Individual configuration

If several outlet points are active at the same time, individual points can be selected by pressing and holding them. The temperature and volume can then be set individually for this outlet point.

Resetting all outlet points

Choreographies

Starting a choreography

During a choreography temperature may be changed by +/- 2°C and water volume by +/- 20%. Pressing any rotary knob or display button enables you to terminate a choreography prematurely.

Fragrance

General terms and conditions

Replacement of fragrance bottles

As soon as a fragrance is empty, the icon will be shown in grey. This is a request to replace the fragrance bottle. The 200 ml bottle will last for approx. 230 minutes at default settings.
Proceed as shown in drawings 1 to 4 to replace a fragrance bottle.
Confirm replacement

Please follow the safety instructions on the label and on the instruction leaflet of the fragrance when replacing and disposing of the completely empty bottles.

Reordering fragrance bottles

Sleep mode
The Sensory SkyATT has an automatic sleep mode. The system can be woken up and made ready for use by pressing or turning any control element. If it is not used for 60 minutes, the System will return to automatic sleep mode. The pre-defined water volume is 80%, the pre-defined temperature 38°C. Individual settings are saved for five minutes after the water has been switched off.
Ready - Display button 1
Ready - Display button 2
Ready - Display button 3

On/Off

using rotary knob
using rotary knob
using display button
Cold-water mist
The temperature and volume cannot be adjusted.
Light
The light colour and intensity cannot be adjusted.
Fragrance
The fragrance is automatically supplied in the water in the rain curtain. It is not possible to activate more than one fragrance at any one time

Volume adjustment

Temperature adjustment

Disable scalding protection system

1 = turn to max

 

2= push + turn at the same time

 

The scald protection system will be re-enabled after 10 minutes.

Individual configuration

If several outlet points are active at the same time, individual points can be selected by pressing and holding them. The temperature and volume can then be set individually for this outlet point.

Resetting all outlet points

Starting a choreography

During a choreography temperature may be changed by +/- 2°C and water volume by +/- 20%. Pressing any rotary knob or display button enables you to terminate a choreography prematurely.

General terms and conditions

Replacement of fragrance bottles

As soon as a fragrance is empty, the icon will be shown in grey. This is a request to replace the fragrance bottle. The 200 ml bottle will last for approx. 230 minutes at default settings.
Proceed as shown in drawings 1 to 4 to replace a fragrance bottle.
Confirm replacement

Please follow the safety instructions on the label and on the instruction leaflet of the fragrance when replacing and disposing of the completely empty bottles.

Reordering fragrance bottles

Cleaning

Display button

1 = Head spray On/Off

 

2 = Rain curtain On/Off

 

3 = Hand shower On/Off

 

4 = Body spray On/Off

 

 

 

 

 

5 = reAdjust On/Off

 

6 = reJoice On/Off

 

7 = Cold-water mist On/Off

 

8 = reLease On/Off

 

 

 

 

9 = Fragrance reAdjust On / Off

 

10 = Fragrance reJoice On/Off

 

11 = Shower zone lighting On / Off

 

12 = Fragrance reLease On/Off

Display button 1
Display button 2
Display button 3

Rotary knob