Activate
Hot, cold, click!
Digital controls, countless uses.
Operate
Adjust individually.
Simple and intuitive operation – with just a flick of the wrist.
Experience
Experience water.
Comfortable applications for the bathroom, spa and kitchen.

All electronic control features at a glance.

Safety information

Logic controls

Display button

1 = WaterFall On / Off

 

2 = Jets On / Off

 

3 = Electronic pop-up waste and overflow set

 

4 = Affusion pipe On / Off

 





5 = Scenario Relax On / Off

 

6 = Fill calf deep On / Off

 

7 = Scenario Vitalize On / Off

 

8 = Fill ankle deep On / Off

Display button 1
Display button 2

Rotary knob

Functions

The Foot BathATT has an automatic sleep mode. The system can be woken up and made ready for use by pressing or turning any control element. If it is not used for 60 minutes, the System will return to automatic sleep mode. The pre-defined water volume is 80%, the pre-defined temperature 38°C. Individual settings are saved for five minutes after the water has been switched off.

Ready 1
Ready 2
Sleep mode

On/Off

using rotary knob
using rotary knob
using display button
using display button
Jet activation
If the jets are activated manually, the strainer waste will first close and water will be let in automatically. As soon as an adequate water level has been reached, the water flow will stop and the jets will start. You can stop the jets by pressing the button a second time.

Volume adjustment

Temperature adjustment

Disable scalding protection system

1 = turn to max

 

2= push + turn at the same time

 

The scald protection system will be re-enabled after 10 minutes.

Electronic pop-up waste and overflow set

Close / Open

Scenarios

Starting a scenario

During a scenario temperature may be changed by +/- 2°C and water volume by +/- 20%. Pressing any rotary knob or display button enables you to terminate a scenario prematurely.

Comfort Functions

Automatic filling

Starting a comfort function

Volume adjustment

Display button

1 = WaterFall On / Off

 

2 = Jets On / Off

 

3 = Electronic pop-up waste and overflow set

 

4 = Affusion pipe On / Off

 





5 = Scenario Relax On / Off

 

6 = Fill calf deep On / Off

 

7 = Scenario Vitalize On / Off

 

8 = Fill ankle deep On / Off

Display button 1
Display button 2

Rotary knob

The Foot BathATT has an automatic sleep mode. The system can be woken up and made ready for use by pressing or turning any control element. If it is not used for 60 minutes, the System will return to automatic sleep mode. The pre-defined water volume is 80%, the pre-defined temperature 38°C. Individual settings are saved for five minutes after the water has been switched off.

Ready 1
Ready 2
Sleep mode

On/Off

using rotary knob
using rotary knob
using display button
using display button
Jet activation
If the jets are activated manually, the strainer waste will first close and water will be let in automatically. As soon as an adequate water level has been reached, the water flow will stop and the jets will start. You can stop the jets by pressing the button a second time.

Volume adjustment

Temperature adjustment

Disable scalding protection system

1 = turn to max

 

2= push + turn at the same time

 

The scald protection system will be re-enabled after 10 minutes.

Electronic pop-up waste and overflow set

Close / Open

Starting a scenario

During a scenario temperature may be changed by +/- 2°C and water volume by +/- 20%. Pressing any rotary knob or display button enables you to terminate a scenario prematurely.

Automatic filling

Starting a comfort function

Cleaning